Astro equipment.

Astro auto tools.

1/4" & 3/8" Dual Head Industrial Ratchet
1/4" & 3/8" Dual Head Industrial Ratchet
Reversible and has both 1/4" and 3/8" drive in one compact unit. Precision 72-tooth ratchet design for short stroke operation. Chrome-plated and heat treated with comfortable rubber grips.
Use this compact ratchet underhood and dash in close clearance areas. The Stubby Combination Wrench Sets available in SAE (43300) and Metric (43301) fit in limited access areas.
2 1/16" Single Gauge Pod Chevy Astro 95-00
2 Ton Aluminum Floor Jack
2 Ton Aluminum Floor Jack - Lightweight jack weighs less than 55 lbs. yet lifts up to 4000 lbs.! Padded saddle lifts from 3.7" to 19" in only 5 strokes. Anodized aluminum finish and side lifting handle lends a race ready look. Imported. One year manufacturer's warranty.
Lifts 4000 lbs from 3.7" to 19" in 5 strokes. Be sure to use in conjunction with appropriatly placed jack stands before working under the vehicle.
The Floor Jack Adapter (43042) can be be fitted to this jack.
3 pc Stainless Steelflexible Putty Knifeset
Flexible Stainless Steel Putty Knife Set - Use these putty knives to help remove gaskets, strip paint and more. These putty knives, provided with rubberized handles, come in the following 3 widths: 1.3", 2", and 3". One year limited manufacturer's warranty. Made in Taiwan. Use these flexible putty knives to for light scrapping. Great for use with paint removers. The Gasket Cleaning Kit (46055) can be used to remove stubborn gaskets and other deposites.
2 1/16" Dual Gauge Pod Chevy Astro 95-00
Worldwind Multi- Position Fan
Portable Ventilation - Use this rugged portable air source to improve ventilation in and around your work area. Multi-sided housing with built-in handle easily focuses air stream. Great for rapid drying of wet surfaces. Two built-in 15-amp recepticles provide a convenient connection point for accessories like the optional Heater Adapter (43322B). 20 Ft. grounded power cord. UL Approved. Use for drying wet surfaces or improving ventilation in your work area. Not recommended for use in areas where flammable fumes are present.
For the Heater Adapter order part number (43322B).
Front Hub Puller & Installer Set
Front Hub Puller & Installer Set - Use this kit to remove and install most front wheel drive hubs for servicing wheel bearings, CV joints and transaxle. Kit includes a front hub remover, FWD front hub remover and Ford front hub installer in a durable plastic case. Imported. One year manufacturer's warranty.
This kit includes the tools needed to remove and install most front wheel drive hubs for servicing wheel bearings, CV joints and transaxle. Kit includes Front Hub Remover, FWD Front Hub Installer, Ford Hub Installer and directions in a plastic case.
The Front End Service Kit (49060) includes most commonly used pullers for ball joints, tie rod ends, steering linkages, and more.
3 pc Dead Blow Hammer Set
Dead Blow Hammer Set - Ideal for assembly/disassembly of mechanical components without damaging machined or soft aluminum surfaces. Metal pellets in the hammer head absorb rebound. Set of 3 hammers includes 1/2-lb., and 1 - lb. and 2-lb. Made in China Use these dead blow hammers for numerous assembly/disassembly tasks. Non- rebounding hammers with soft faces prevent damage to delicate surfaces.
Silikroil Penetrating Oil Aerosol (43381Z) works where others have failed. Used in 480 of the Fortune 500 companies.
1/4" Right Angle Die Grinder (Composite Body)
Angle Head Die Grinder - This right angle die grinder with safety lever features a 1/4" collet and ribbed composite handle for comfort and an easier grip. Free speed 20,000 rpm. Requires 3 cfm at 90-120 psi. 3/8" ID air hose recommended. Chuck wrenches included. Made in Taiwan. One year manufacturer's warranty.
Use this tool with felt bobs and carbide burrs with 1/4" shaft. This grinder works well with our (46056) Engine Porting Kit.
Continuous Air Grease Gun
Air Powered Grease Gun - This grease gun works with your air compressor set at 30-120 psi to deliver grease into suspension fittings, 12" flex extension helps get grease into tight access areas. The gun accepts standard 14 ounce cartridges or can be bulk loaded. Spring loaded push valve bleeds off air for quick gun priming. Made in Taiwan.
Air powered grease connects with standard 1/4 NPT fittings. Loads with commonly available 14 oz. cartridge or from bulk. Includes flexible hose attachment for easy access into hard-to-reach areas.
The Tight Spot Grease Gun Adapter (49061) features a 12" flexible line and right angle low clearance head to get into difficult areas.
1/8" Pencil Type Diegrinder
Features 56,000 rpm with 1/8" collet. Works great with our 50 piece Carbide Precision Bit Set (43249) for accurate grinding, detailing, carving and more. Requires 4 cfm at 90 psi. Includes wrenches, 4'10" whip hose and instructions. Made in Taiwan. One year limited manufacturer's warranty.
This Pencil Die Grinder offers superb control for delicate grinding, drilling, carving and shaping operations. The 1/8" collet and 54,000 rpm free speed fits many accessories. Twist control on barrel allows convenient 0-maximum rpm variability. Light 4 ounce weight makes accurate detailing easy.
The high speed Pancil Die Grinder works perfectly with the Precision Carbide Bit Set (43249) for fine drilling, grinding and shaping operations.
Front End Service Kit 5 pc w/Case
End the Suspense! Remove tie rod ends, ball joints and steering linkages without damaging parts. Hardened steel 5 piece set in heavy duty plastic carrying case with instructions. 90 day manufacturer's warranty. Imported.
The Front End Service Kit includes the tools you need for automotive work including changing tie rod ends, ball joints, steering linkages and steering boxes. The pullers included in this kit are designed to permit part reuse versus "pickle-fork" type tools that may damage parts. Kit contains tie rod end pullers, pitman arm puller, ball joint remover, tie rod end lifter, storage case and instructions.
Flanger/Punch Tool Pneumatic
A space-saving addition to your metalworking tools! One side of the double action head produces .040" offset flanges on up to 20 gauge metal for clean welding with little grinding. The other side produces perfectly clean 3/16" diameter holes, ideal for plug welding. Unique swivel-head design lets you work from almost any angle. Punches metal up to 14 gauge. Requires 4 cfm @ 90 psi. Imported. NOTE: The center of the hole produced is 1/4" from the panel edge.
The Pneumatic Flange and Punch Tool produces a .040" offset flange for flush repairs up to 20 gauge or punches clean 3/16" holes in up to 14 gauge steel. Requires 4 cfm at 90 psi. NOTE: The center of the hole produced is 1/4" from the panel edge.
Use the Air Nibbler (28039) for distortion free cuts in up to 16 gauge steel.
7 Piece Body & Fender Set
Body Work Starter Set - Here's an inexpensive way to get started doing your own panel straightening. This 7-piece kit in molded plastic case includes 3 hammers with most popular profiles and fiberglass handles, and 4 dollies including curved, general purpose, heel, and double end hand dolly. One year limited manufacturer's warranty. Made in China.
This 7-piece kit in molded plastic case includes 3 hammers with most popular profiles and fiberglass handles, and 4 dollies including curved, general purpose, heel, and double end hand dolly.
Use this hammer and dolly set to get started in body straightening. The dollies and hammer faces should be smoothed on a belt sander before use. For professional quality body and fender tools see our Martin line.
Martin hammers and dollies are the professional's choice because of their superior durability, balance and finish.
Mini Die Grinder
This Grinder packs a 22,000 rpm punch. Perfect for porting or detail polishing on cars, boats, aircraft, model buildings, etc. 6" long and equipped with a 1/4" collet. Uses 4 cfm @ 90psi. One year warranty. Imported.
The Mini Die Grinder is ideal for porting work because of it's compact size. Maximum RPM is 22,000, length 6", 1/4" collet for tools with 1/4" shaft diameter. This tool requires 4 CFM at 90 PSI.
Touch Up Spray Gun
This "jamb gun" does more than just paint door jambs. Custom painters like them for spraying flames and special effects. Also useful for painting engines, chassis, and other parts. "Overhand" grip gives good control, either right or left handed. Has an 8 oz. aluminum cup, 1/4" air connection. Conventional high pressure design. Imported. Limited 1 year manufacturer's warranty. This gun is illegal to use in California.
The Touch-up Gun Kit includes: the Gun, a cleaning brush, an 8 oz aluminum cup, and complete instructions.
This imported Touch Up Gun requires from 4-7 cfm at 30-70 psi. Fan width is adjustable from 2" to 10". Offers Binks Touch Up Gun performance at a lower price. Great for painting flames, murals, motorcycles, engines, chassis, or small touch up jobs. The nozzle/needle and air cap included with this gun are compatible with most lacquers, enamels, and some urethanes. Note: Illegal to use in California.
The Mini Regulator (34087) makes accurate at-the-gun pressure changes possible.
500Lb Work Stand
Work with ease on fenders, doors, hoods and more. This portable bench is easy to set up. Sturdy tubular steel frame adjusts for height and width. Thick 3/8" foam rubber padding protects painted parts from scratching. Complete with non-skid feet.
This 500 lb. Capacity Portabench provides a sturdy stand for doors, hoods, and other body panels when doing metal work. The replaceable Foam Covers (43122) protect the surface you are working on. A must for working on panels off the car.
Air Nibbler Model 1722
Heavy-Duty Air Nibbler - This pneumatic nibbler leaves metal smooth and free from burrs and distortion. Heavy-Duty unit cuts up to 18 gauge steel or 14 gauge aluminum. Requires 4 cfm @ 90 psi. Imported. 2 Year Manufacturer's Warranty. Replacement Punch (28096A) and Die (28096B) are available separately.
Nibbler comes with punch and die included.
Use this pneumatic samder for numerous sanding/grinding operations. Adjustable air volume control at base of handle helps limit speed.
Order (28096A) for a Replacement Punch and (28096B) for a Replacement Die.
Antenna & Radio Service Kit
Remove Antennas Without Pliers - Pliers can slip and scratch painted surfaces. Antenna removal/replacement is eased with this unique tool. This set includes the Multipurpose antenna wrench, Code retriver for GM, Ford radio removal tool, Chrysler Radio Removal Socket, T10, T15 regular torx bits and TT7, TT10, and TT15 tamper resistant torx bits. Imported. One year manufacturer's warranty.
This set includes the Multipurpose antenna wrench, Code retriver for GM, Ford radio removal tool, Chrysler Radio Removal Socket, T10, T15 regular torx bits and TT7, TT10, and TT15 tamper resistant torx bits in a molded plastic case.
Use the antenna wrench to service Ford, GM, VW, Toyota, and others. The code retriver is designed to work on GM and Ford. The Ford radio removal tool releases the connectors that hold the radio. The Chrysler radio removal socket works with your 1/4" drive and locates into the 3 slots used on this hardware. The various Torx bits fit commonly used T7, T10, and T15 regular and tamper resistant (with center pin) fasteners.
3" Composite Body Cut-Off Tool
Slice through sheet metal, muffler clamps, and steel rods up to 3/4" thick. Uses an abrasive cut-off wheel which spins at 22,000 rpm for fast cutting in tight places. Has 1/4" NPT air inlet and uses 4 cfm at 90 psi. Will work on 1 hp or larger compressor. Face shield recommended. Can be used with our 3" Cut-Off wheels sold in a pack of 5 (28105), pack of 10 (28084D) or Pack of 30 (28084C).
The 3" Composite Bodied Cut-Off Tool includes one 3" cut-off wheel, chrome plated spark guard, blade changing allen wrench and open end wrench, and parts list.
The Utility Cut-off Tool allows you to slice through sheet metal, rusty muffler clamps, bumper bolts, and steel rods up to 3/4" thick. The tool uses an abrasive wheel that spins at 22,000 rpm. 1/4" NPT air inlet. Requires 4 cfm at 90 psi. Can be operated with compressors as small as 1 hp.
Can be used with our 3" Cut-Off wheels sold in a pack of 5 (28105), pack of 10 (28084D) or Pack of 30 (28084C).
4-Ton Porta Power Kit
Hydraulic Body Straightening - Lift, Push, Bend and Straighten bent frames and bodywork with the ease of operating a hydraulic jack. Works great with your torch or hammer and dolly to make professional repairs. Includes pump with easy to operate release valve, spreading wedge, ram with 4 extensions, 7 accessories and instructions. 90 Day Manufacturer's Warranty. Made in Taiwan.
*****THIS IS AN OVERSIZED ITEM REQUIRING ADDITIONAL SHIPPING*****
This kit comes packed in a blow molded case and includes the following: Male Connector, Spreader Ram Toe, 16" Extension Tube, Female Adapter, Spreader Plunger Toe, 12" Extension Tube, Hose, Wedge Head, 8" Extension Tube, Spreader Ram, 90 degree V-Base, 4" Extension Tube, 2 3/4" Flexible Head, 4-Ton Hydraulic Unit, Serrated Saddle, Rubber-Faced Flat Base, and Ram.
Use this hydralic for a variety of metal straightening finctions. Variety of extensions and adapters make it possible to fit many collision repair needs. 4 Tons of hydraulic power works in conjunction with your torch and/or hammer and dolly to release the stresses in the dented metal.
Use the Mechanical Body Puller (31148) to push/pull across engine compartments, door and trunk openings.
5" Body Sander High Speed
Composite Body Air Sander - This comfortable composite bodied air sander is one of the most commonly used body shop tools. Includes 3", 4 1/2", and 5 1/2" phenolic backing discs to fit many different abrasives. Built-in variable speed control allows easy control up to 20,000rpm. Requires only 4.5 cfm at 90-120 psi. Made in China. 90 Day Manufacturer's Warranty.
Includes 3", 4 1/2", and 5 1/2" phenolic backing discs to fit many different abrasives. Built-in variable speed control allows easy control up to 20,000rpm. Requires only 4.5 cfm at 90-120 psi.
Use this general purpose sander with your air compressor for a variety of sanding, grinding, and finishing jobs. variable speed allows you to dial in the optimal speed for the job at hand. Apply a couple drops of Automatic Transmission Fluid in the air connector before daily or before each use.
Air Hose is available in red rubber 25' (43317), 50' (43316) or in blue PVC 25' (43318), 50' (43319).
3 pc Stainless Steel bolstered Scaper Set
Ridged Stainless Steel Scrappers - Great for removing heavy grundge and undercoating. Bolstered design survives gentle hammering for removing stubborn deposits. Includes 3 Scrappers: Straight 1.3", Bent 1.3" and Straight 2". One year limited manufacturer's warranty. Made in Taiwan.
Bolstered design survives gentle hammering for removing stubborn deposits. Includes 3 Scrappers: Straight 1.3", Bent 1.3" and Straight 2".
Great for removing stubborn deposites, undercoating, dirt and ,with care, gaskets.
The Gasket Cleaning Kit (46055) can be used to remove stubborn gaskets and other deposites.
Impact Driver
Mig Welders Pliers
The Tips are both squared off and are spring-loaded to hold open for removing spatter. The inside surfaces are knurled in two places for installing tips and nozzles, and they also feature a wire cutter. Handles are rubberized for a more comfortable grip and better safety.
This tool can be used for removing weld spatter, removing hot contact tips or cutting wire. The inside surfaces are knurled in 2 places for replacing hot contact tips and nozzles.
Air Undercoating Gun w/o Bottle
Undercoating/Rustproofing Application Gun - Use this basic application gun to spray a wide range of materials from undercoatings, truck bed liners, to our Heavy-Duty AntiRust and more. Order the gun with bottle (16030) to save over individual pricing. Uses 8 cfm @ 60-90 psi. Imported. 1 Year Limited Manufacturer's Warranty.
One Undercoating Gun.
Use this gun to apply virtually any truck bed liner or undercoating. Requires 8 cfm at 60-90 psi. Adjust nozzle in or out to maximize coating delivery.
For an extra Bottle and Lid order (16003A).
3/16 " Air Riveter
Air Powered Rivet Gun - Use this 3/16" capacity rivet gun for fast fatique free rivet installation . Requires about 2 cfm at 90-120 psi. Includes 3/16", 5/32", 1/8", and 3/32" nose pieces. Works great with our 1/8" Steel (31019) and Aluminum (31020) Countersunk Rivets. Imported. 90 Day Limited Manufacturer's warranty.
Air Powered Rivet Gun - Use this 3/16" capacity rivet gun for fast fatique free rivet installation . Requires about 2 cfm at 90-120 psi. Includes 3/16", 5/32", 1/8", and 3/32" nose pieces. Works great with our 1/8" Steel (31019) and Aluminum (31020) Countersunk Rivets.
Use this pneumatic rivet gun to speed assembly projects. Great for putting together our balst cabinets. Works at any angle. Maximum rivet capacity 3/16". Overall length 9 1/2". Inlet 1/4" NPT. Recommended air hose ID 3/8". Air consumption about 2 cfm at 90-120 psi. Weight 2 1/2 lbs. Works with any blind rivets up to rated 3/16" capacity.
Do you need any rivets? We sell boxes of 500 countersunk rivets in Steel (31019) and Aluminum (31020).
Rotating Head Riveter
This unique swivel head design of this riveter from Swingline makes it easier to set rivets in tight spaces. The head rotates a full 360 degrees and will operate in any position. Handles 3/32", 1/8", 5/32" and 3/16" rivets, handy wrench stored in handle easily removes and installs rivet heads. Durable metal construction. Limited 1 year manufacturer's warranty. Imported.
This quality Swingline Riveter features a rotating head for easy accessibility in tight areas.
The long padded handles offer easy leverage when working with 3/32", 1/8", 5/32" or 3/16" rivets.
Internal External Snap Ring Plier Set
Snap Ring Pliers Here's one tool that removes/installs snap rings from 10-50mm (about 3/8" - 2"). Four quickly interchanged heads convert from the straight ahead position to 45 and 90 degree angles. Each head works on internal or external rings. 3" grips provide a comfortable non-slip grip. Imported. One year manufacturer's warranty.
Snap ring plier for 3/8"-2" (10-50mm) internal or external snap rings. Includes 4 interchangable heads with instrustions.
Use this circlip/snap ring tool for internal/external rings from 3/8-2" (10- 50mm) diameter. Easy to change jaws: Push spring retaining joint inward, lift retaining stop upward to horizontal position to loosen the jaws, and put the retaining stop in verticle position to hold the jaw in place.
Hose Clamp Pliers
Easy Access to Flat Spring-Style Hose Clamps - Trying to reach a hose clamp under the hood of a modern engine compartment can be a real problem. This tool from Astro features a plier with 20" flexible cable extension with a low clearance clamping end. Locking pawl on handles hold hose clamp in the open position so it can be easily slid away from the hose end. Great for installing hoses too! Save your temper and your time. Imported. Limited Lifetime Manufacturer's Warranty (flexible cable is a consumable and is not covered by warranty).
Squeezing the plier compresses the captured tangs of the hose clamp. Locking pawl on the handles holds the clamp in the loose position so it can be easily moved back.
3/8" Reversible Air Drill
Compact Air Drill - Fits where cordless and AC powered drills are too bulky. Speed adjusts with trigger pull up to 1800 rpm. Convenient thumb control reverses direction. Fits common 1/4npt quick release fittings. Uses about 7 cfm at 90-120 psi. One year limited manufacturer's warranty. Made in Taiwan.
One 3/8" capacity air drill 1800 rpm max. Convenient thumb control reverses direction. Fits common 1/4"npt quick release fittings. Requires 7 cfm at 90- 120 psi. Includes drill, instructions, chuck key and allen wrench.
The compact size of this drill fits limited access areas. Overall length is 7-7/8". Weighs 2-1/2 lbs. Recommended for use with 3/8" ID air hose. Average air consumption 7 cfm at 90-120 psi.
Would you like a Set of 3 Left Hand Drill Bits (43022) to help remove damaged hardware?
8 pc Fuel & Trans Line Disconnect Tool Set
8 Pc. Fuel & Transmission Line Disconnect Tool Set - Use the right tool for the job. Avoid damaging critical pressurized fuel and transmission lines. This set is designed to separate fittings on fuel and transmission lines on many 1986 and newer domestic cars. Made in Taiwan. One year limited manufacturer's warranty.
This set includes an oil cooler line disconnect tool, 3/8", 5/16", and 1/4" fuel line tools, fuel line disconnect tool (same as T93T-9550-AH), tool for 1986 and newer Ford vehicles with AXOD, AOD, or ATX automatic transmissions, tool for 1990 and newer Ford Rangers & Explorers with 4.0 liter, 6 cylinder engines, tool for Ford CF fuel lines w/hair pin connectors, universal for radiator to transmission oil cooler lines 1987 & newer Olds, Toronado, Buick, Riviera Reatta, Cadillac Eldorado, Seville, & GM 1/2 ton, 3/4 ton, and 1 ton pickups, and details ina plastic molded case.
The Engine Support (46161) rests on the fender bolt flange. Lifts engine slightly to make transmission removal easier.
Ball Joint - 4WD Service Tool
Ball Joint and Four Wheel Drive Service Tool Kit Remove and install press fit type ball joints, universal joints, and truck brake anchor pins in place on the vehicle. Easier and safer to use than a bench vise because of the wide range of included sleeves/adapters. Set includes a Heavy Duty "C" frame press, 3 receiver tubes (2 3/4" ID x 3" OD, 2 1/4" ID x 2 1/2" OD, 1 3/4" ID x 2" OD), installation and removing adapters, 1pc installing adapter, and complete instructions in a durable blow molded case. Imported. One Year manufacturer's warranty.
Set includes a Heavy Duty "C" frame press, 3 receiver tubes (2 3/4" ID x 3" OD, 2 1/4" ID x 2 1/2" OD, 1 3/4" ID x 2" OD),installation and removing adapters, 1pc installing adapter, and complete instructions in a durable blow molded case.
Use this kit for the removal and installation of press fitted ball joints, universal joints, and truck brake anchor pins.
Deluxe Welding Cart
This Welding Cart constructed from heavy gauge steel, supports up to 100 lbs. Cart measures 28" long by 12" wide by 28" high. Imported.
This Welding Cart constructed from heavy gauge steel, supports up to 100 lbs. Cart measures 28" long by 12" wide by 28" high.
Use this cart to transport most MIG welders with shielding gas bottle. The Lincoln MIGs we sell fit on this cart.
The Solar Powered Auto Dimming Welding Helmets free your hands to make welding easier. These helmets are available with the following graphics: Flame (19141), American Eagle (19140), and Blue (19139).
Vinyl Eraser Arbor
The Arbor for the Vinyl Eraser is 1 5/8" long and accepts the 5/16"-20 thread on the Vinyl Eraser. The adapter shaft diameter is 5/16".
Vinyl Eraser 3 1/2" Diameter
You can remove all vinyl pinstriping, graphics, and adhesive residue without damaging the paint. Simply mount the eraser in your air drill (recommended speed is 3,500 to 4,000 rpm) and safely remove all the old body striping in minutes. Unlike chemicals and solvents commonly used for this job. The soft wheel is gentle to the finish. Not recommended for acrylic lacquer or plexi- glass.
The 3 1/2" Vinyl Eraser fits any 3/8" drill.
Vinyl Eraser removes vinyl pinstriping, graphics, and adhesive residue with- out damaging paint. For best results, use with light pressure and do not exceed 4000 rpm. For clean-up, many of our customers find the PRE Painting Prep (10041 Z) works well to remove residual adhesives that are often left behind. Insert threaded end directly into drill chuck if not using extended shaft adapter.
3" Cut-Off Wheels pack of 5
Cut-Off Wheels - Cut through damaged metal and rods up to 3/4" thick. Wheels are 3" diameter with 3/8" mounting hole. Maximum RPM 25,000. Made in the USA.
Pack of 5 cut-off wheels. 25,000 RPM max.
Use these cut-off wheels in 3" pneumatic cut-off tools. Works great in the (28024) Composite Body Pneumatic Cut-Off Tool.
The Copper Spoons Kit (19108) makes it easy to fill weld small voids between panels.
3 Way Air Swivel
Air tools are easier to maneuver when you don't have to fight the air hose. The 3-Way Swivel Connector provides tangle free operation of your air tools. Uses standard 1/4" male and female fittings. Made in Taiwan. Limited one year manufacturer's warranty.
Air swivel accepts 1/4" NPT threads.
Use the swivel to enhance maneuverability of air tools and low air use paint guns.
The Disposable In-Line Air Filter (34066) picks up moisture and oil contamination before it can cause defects in paint finishes.
Flanger/Punch Punch Replacement Part
A space-saving addition to your metalworking tools! One side of the double action head produces 1/16" offset flanges for clean welding with little grinding. The other side produces perfectly clean 5mm dia. holes, ideal for plub welding. Unique swivel-head design lets you work from almost any angle. Use on metal up to 14 gauge. Requires 4 cfm at 90 psi. Imported.
The Pneumatic Flange and Punch Tool produces a .040" offset flange for flush repairs up to 20 gauge or punches clean 5mm holes in up to 14 gauge steel. Requires 4 cfm at 90 psi.
Use the Air Nibbler (28039) for distortion free cuts in up to 16 gauge steel.
Steering Wheel Remover Lock Plate Compressor Set
Steering Wheel Remover/Lock Plate Compressor Set Remove steering wheels on most domestic and imported cars, with or without tilt or telescoping steering columns. Heavy duty molded case includes 4 pairs of cap screws 5/16"-24 x 3 1/2", 3/8"-16 x 3 1/2", 5/16"-18 x 4", M8-1.25 x 90mm, Steering wheel Puller and a Lock Plate Compressor. Imported. One Year Manufacturer's Warranty.
This kit is supplied in a heavy duty molded case includes 4 pairs of cap screws 5/16"-24 x 3 1/2", 3/8"-16 x 3 1/2", 5/16"-18 x 4", M8-1.25 x 90mm, Steering wheel Puller and a Lock Plate Compressor.
Use wheel puller to pull steering wheel from shaft. Use the lock plate compressor to compress plate in to remove/install the snap ring to access the turn signal switch.
Harmonic Balancer Puller Set
Pull crankshaft pulleys/harmonic balancers on most domestic and imported cars with this comprehensive set. Includes assorted SAE and Metric Hardware, Flange to accommodate 2 and 3 bolt hole pulleys, 2 differing length push bolts and end piece adapters in a molded plastic case. Made in Taiwan. Limited 1 year manufacturer's warranty.
Reversible Paint Suit Coveralls
An Extra Layer or Protection - Modern paint finishes contain solvents and other chemicals that can be absorbed through the skin. This breathable, washable paint suit provides comfortable protection. Easy to put on with 3/4 length zipper, this suit features a synthetic front with natural cotton back panel and velcro closures at the wrists and ankles. One size fits all from 5' to 6'6". Imported.
One large paint suit with attached hood.
Use this suit to help protect against paint overspray. Made from 75% Nylon, 15% Polyester, 7% Cotton, and 3% Polyurethane.

Buy The Eastwood Company accessories here!