Alvin auto tools.
- Lab-Metal 24 oz
Lab-Metal 24 oz.
Lab Metal the Filler Preferred by Powdercoaters - Lab Metal is a ready- to-use metal reinforced leveling agent that can be drilled, buffed, or tapped. Readily adhere's to virtually any clean surface. No catalyst needed so it's easy to apply. Use the Lab Solvent to smooth the Lab Metal to a glass smooth surface to minimize sanding.
Lab-Metal 24 oz
Remove paint, rust, oil, dirt, moisture from application surface. Lab-Solvent is the recommended surface cleaner. Sitr Lab-metal well. Apply with putty knife sqeegee, or similar tool. To fill holes, apply in thin layers (less than 3/8"). Let each layer dry before applying the next. Dry time: A 1/16" layer hardens in 1-2 hours; 1/8" hardens in 3-4 hrs. Infra-red lamp use will speed drying time. For verticle or overhead applications, pour Lab-metal into open container and allow to stand 5-10 minutes to render it less fluid. Shelf life 2 years in unopened can. Not intended for use as an adhesive.
Lab-Metal 24 oz
Use Lab-solvent to clean application surface and thin Lab-metal.
- Lab Metal Tube 20 oz
Lab Metal Tube 20 oz.
Now Lab Metal is available in a convenient 20 oz. caulk tube. No mixing required with this easy to use format. This is the same metal-reinforced leveling agent as the popular Lab Metal. Use a body filler spreader dipped in Lab Solvent for a smooth surface.
Lab Metal Tube 20 oz
Remove paint, rust, oil, dirt, moisture from application surface. Lab-Solvent is used to clean the surface. Trim nozzle to produce desired bead and load cartridge into standard caulk gun. To fill holes, apply in thin layers (less than 3/8"). Let each layer dry before applying the next. Dry time: 1/16" layer hardens in 1-2 hours; 1/8" hardens in 3-4 hrs. Infra-red lamp use will speed drying time. For verticle or overhead applications, load Lab-metal into open container and allow to stand 5-10 minutes to render it less fluid. Shelf life 2 years in unopened tube. Not to be used as an adhesive.
Lab Metal Tube 20 oz
The 10208ZP Lab Solvent (one pint) helps smooth out Lab Metal.
- Hi-Temp Lab Metal 24 oz
Hi-Temp Lab Metal 24 oz.
Hi-Temp Lab-metal withstands 1000 degrees F. If hi-temp leveling or filling is needed this is the product to use. Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425? F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.
Hi-Temp Lab Metal 24 oz
Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425? F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.
Hi-Temp Lab Metal 24 oz
Use Lab Solvent (10208ZP) to help cmean surfaces and smooth out High Temp Lab Metal.
- Lab-Solvent 16 oz
Lab Metal Solvent 1 Pint - Use the Lab Solvent for clean-up or to smooth the Lab Metal to a glass smooth surface to minimize sanding.
Lab-Solvent 16 oz
Use Lab-solvent to clean metal surfaces before applying Lab-metal or to thin Lab-metal to improve spreadability.
Buy The Eastwood Company accessories here! |
|
|
